Cookie Img Back to top
   Call Me Free Offline Send SMS Send Inquiry
Home » Products » Peelable Coating » Peelable Coating

Peelable Coating

Peelable Coating
Peelable Coating
Product Code : 12
Product Description

Established with a commitment to offer quality approved products, we are offering supreme quality Peelable Coating. It is used on non porous surfaces like Selected Plastics, FRP Glass, Stainless Steel Aluminium, Polished Stones, etc. Processed at our vendor's end using supreme quality basic chemicals and latest methodology, this coating is also tested on various quality parameters to ensure its purity and correct formulation. To meet diversified demands of our clients, we offer this Peelable Coating in several packaging options at most competitive prices.


  • Easy to apply

  • Temperature resistance

  • Good leveling property

  • Eco-friendliness


Pellable Coating which will form a skin tight protective film (Water Resistant). It can be easily peeled off when desired. It can be used as a Maskant


It is supplied in Green and Blue colour. It can be supplied in transparent form also and any colour can be given on request

Health and Safety:

Protect your skin and eyes while application use plenty of water in case of irritation eyes plenty of eater in case of irritation to eyes and skin and consult to doctor immediately


Peelable Coating is a Sprayable and Brushable Grade SHAKE WELL BEFORE USE. Do not add any diluents / Spray gun should not contain residues of Oil Lacquer and Grease. Clean thoroughly with thinner. Spray the material with a pressure of 70 - 120 psi on the surface in a uniform coating. It can be recoated 2 or 3 times in the wet conditions to obtain a thicker dry coating. Allow coating to dry in a stream of hot/cold air. Sunligth or hot air can be used in enhancing the drying process.

Drying Time:

Approx drying time is 45 to 60 mins depending on thickness of coating and ambient temp. Cured Film can be peeled off after 12 to 24 hrs depending on external ambient temp


If the dry film is ripped then it can be lifted and resealed by application of a fresh wet coat to the patch. It will rejoin and bond into the original film by itself


Easily stripped away by hand when required. We do no recommend removing in freezing conditions as the coating will be brittle


1 kg of material will approx cover 100 - 250 sq ft of area at a dry film thickness of 50 to 100 microns. We recommend a minimum 120 microns DFT for easy film removal


All spray equipment brushes or rollers should be washed with thinner immediately after use


Shelf life is 6 months from mfg date Do not allow liquid to freeze. Store between 10°C to 30°C Store in a cool and dry place away from sunlight.

General Note:

It is important that the product is thoroughly evaluated under production conditions before being commercially adopted (such an evaluation should incorporate a reference to ageing). The above recommendations are made in good faith for the Guidance of users and are without liability. Any queries should be referred to our technical department.




Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.

12-H, Darya Ganj, Opp. Traffic Kotwali, Delhi - 110002, India
Mr. Mukesh Gupta (CEO)

Product Showcase
Send Inquiry Send SMS    Call Me Free